Notice:
Because the refurbished machine has been used, it is inevitable that there will be some defects or some traces of use that cannot be removed. If you are concerned about this, you can go to buy a brand new, unopened machine.
Your Must-Know Before Purchase:
▸ Each Refurbished Product:
Undergoes full functionality testing, where any defective modules are replaced;
Is put through a thorough cleaning and inspection process;
Is repackaged (including appropriate manuals, and parts);
Undergoes the same basic testing procedures and is assessed with the same technical guidelines as new products;
Some of the refurbished products may have slight signs of wear, which will not affect the normal functionality of the machine. Return requests for such reasons will not be entertained.
If the refurbished machine you purchased is missing accessories, or some parts are unavailable, please contact us and we will send you new accessories after receiving your feedback.
After-sales Regulations for Refurbished Machines
Note: This machine is a refurbished machine. Each refurbished machine has traces of use. This is an inevitable situation. If you mind, you can buy a brand new machine.
1. No returns or refunds will be accepted for refurbished machines unless there are special circumstances.
Special circumstances such as:
①If we do not ship within 5 days after you place an order (except domestic and foreign holidays) or do not have a logistics order number, you can apply for a return and refund,
②If the logistics problem causes the loss of parts, or the machine is damaged and cannot be used by logistics, you can apply for a return and refund,
③If the refurbished machine is temporarily out of stock and you do not want to wait, you can apply for a return and refund.
2. We promise to let you receive a refurbished machine that can be used. If you receive the machine and assemble it and find that the machine is faulty and cannot be used, please contact us as soon as possible. We will send new accessories from the 0verseas warehouse for you to replace for your use. If the accessories in the 0verseas warehouse are insufficient, we will send them from China.
3. Refurbished machines only have 15 days of after-sales channels, and the warranty channels will be closed after 15 days.
① Please check the machine within 7 days after receiving it to check whether the machine is usable or missing accessories. If the accessories are missing after 7 days, they will not be sent free of charge.
② The refurbished machine will no longer be free of charge after 15 days from the date of receipt, but technical questions and machine usage instructions will still be provided.
③ In special circumstances, we will extend your warranty period. For example, if you assemble the machine immediately after receiving it, but find a fault and cannot use it, we will send you new accessories, and the warranty period will be calculated from the time you sign for the accessories.
4. Refurbished machines generally do not support exchanges. If you are not used to the appearance of the refurbished machine you received and want to exchange it, you need to do so within 7 days of receiving the goods, and you need to pay the shipping cost of the exchange and the shipping cost of the machine.Please note that the exchanged machine is still a refurbished machine.
Features:
1. Installation-free: The A12Pro overall frame is made of aluminum alloy and is cast in one piece. It can be used out of the box without installation and has excellent structural stability.
2. Ultra-high power: Using the most stable 12W high optical power laser module at present. The latest laser spotCompression technology, powerful and long beam, can cut 8mm paulownia board, 5mm black acrylic board, 6mm basswood plywood, 2 layers of laser-specific vinyl at one time, and adopts fixed focus design, fast and accurate focus in 10s.
3. Second-generation blue-light laser spotCompression process: The A12Pro laser adopts the second-generation laser spotCompression process, which further compresses the laser spot and significantly improves cutting capabilities. Compared with machines of the same level, the cutting capacity is increased by 30%.
4. More stable and high-speed structure: The bottom frame of the A12Pro is formed in one piece, and the X-axis metal adopts a dual-axis guide rail structure. The working jitter is very small, ensuring that the machine does not jitter when running at a high speed of 500mm/s (the data is the mechanical movement speed of the frame, low The power machine needs to turn down the speed otherwise the engraving marks will be very shallow).
5. Tank chain bundling: In order to make the machine more beautiful and the structure more stable, Atomstack A12 Pro adopts a tank chain wire bundling scheme. The wire harness runs smoothly without entanglement and improves the wire life.
6. Upgrade to Atomstack’s self-developed 32-bit motherboard: the most intelligent self-developed ESP32 motherboard, with faster data reception and processing capabilities, and optional accessories to enable auto-focus and resume carving after power off. Sinking cutting and other functions.
7. New non-clogging laser: The new A12 laser has a built-in tool-free focusing module and reserved an installation place for nozzle and pipe of air assist system, without wire interference, simple and beautiful. There is also a patented double-layer wind collecting cover design, which can ensure long-term use without clogging or contaminating the lens, greatly extending the life of the laser. (The air assist pump need to purchase separately)
8. Atomstack’s self-developed mobile APP: Atomstack’s self-developed mobile APP is now available in major Android application markets and AppleAPPstore (you can also scan the manual QR code to download). It is small in size and multi-functional, bringing a new control experience. Come here Give it a try.
9. New filter panoramic glass eye protection design: The panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of ultraviolet light. You and the people around you do not need to wear goggles to watch. Laser engraving. Reduce your goggle expense and inconvenience of wearing goggles.
10. Broad compatibility: The machine is compatible with various mature engraving software, such as LaserGRBL and LightBurn, and supports Win XP/Win 7/Win 8/XP/Win 10. It also supports Apple system (LightBurn) and engraving file formats. Support NC, BMP, JPG, PNG, DXF, etc.
11. Upgraded compressed spot coupling technology: the ultra-fine laser focus area is reduced to 0.05*0.06mm. The high-density laser can cut 12mm thick plywood and 20mm thick black acrylic multiple times; it can directly engrave mirror stainless steel metal, ceramics, glass, and engrave &The cutting speed is 30% higher than theOrdinary model, and the ultimate cutting thickness is comparable to the effect of a 130W CO₂ laser engraving machine.
12. Safety protection: It is equipped with an emergency stop button. If an unexpected situation occurs, the machine can be stopped at any time. It is also equipped with a limit switch and a gyroscope to make laser work safer.
Specifications:
Model: ATOMSTACK A12Pro
Engraving Area: 370x310mm
Materials that can be engraved/cut
Carving materials: wood, bamboo, cardboard, plastic, leather, PCB, alumina, non-reflective electroplated and lacquered metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate;
Cutting materials: cardboard, non-woven fabrics, wooden boards, plywood, acrylic (transparent needs to be painted black), some thin plastic boards, sponges, aluminum and stainless steel and other metal sheets;
Laser output optical power: 12W
Laser wavelength: 455±5nm
Engraving accuracy: 0.02mm
Focusing method: fixed focus laser, no focus adjustment required
Laser protective cover: There is a protective cover on the laser to protect the user’s eyes, without the need to wear additional goggles. At the same time, it prevents pets from scratching the laser point
Operating software: LaserGRBL, LightBurn, supports Win XP/Win 7Win 8/XP/Win 10 system
Supported file formats NC, BMP, JPG, PNG, DXF,
Data transfer method: USB connection
Package Included:
1 x Main Frame (Plug Type as your choice)
1 x Laser Module
1 x Tank Chain
1 x Installation Screws
1 x Tool Kit
1 x Focus Film
3 x Acrylic Pieces
3 x Wood Pieces
1 x Ties
1 x Desiccant
1 x Brush
1 x Dust-free Cloth
1 x Power Adapter
1 x Manual
1 x Data Cable
