[UK Direct] Refurbished ATOMSTACK P7M40 Portable Laser Engraving Machine Cutter Wood Cutting Design Desktop DIY Laser Engraver New Eye Protection Design Upgrated Ultra-Fine Laser Focal Area – UK

Notice:
Because the refurbished machine has been used, it is inevitable that there will be some defects or some traces of use that cannot be removed. If you are concerned about this, you can go to buy a brand new, unopened machine. 

Your Must-Know Before Purchase:

▸ Each Refurbished Product:
Undergoes full functionality testing, where any defective modules are replaced;
Is put through a thorough cleaning and inspection process;
Is repackaged (including appropriate manuals, and parts);
Undergoes the same basic testing procedures and is assessed with the same technical guidelines as new products;
Some of the refurbished products may have slight signs of wear, which will not affect the normal functionality of the machine. Return requests for such reasons will not be entertained.

If the refurbished machine you purchased is missing accessories, or some parts are unavailable, please contact us and we will send you new accessories after receiving your feedback.

After-sales Regulations for Refurbished Machines

Note: This machine is a refurbished machine. Each refurbished machine has traces of use. This is an inevitable situation. If you mind, you can buy a brand new machine.

1. No returns or refunds will be accepted for refurbished machines unless there are special circumstances.
Special circumstances such as:
①If we do not ship within 5 days after you place an order (except domestic and foreign holidays) or do not have a logistics order number, you can apply for a return and refund,
②If the logistics problem causes the loss of parts, or the machine is damaged and cannot be used by logistics, you can apply for a return and refund,
③If the refurbished machine is temporarily out of stock and you do not want to wait, you can apply for a return and refund.

2. We promise to let you receive a refurbished machine that can be used. If you receive the machine and assemble it and find that the machine is faulty and cannot be used, please contact us as soon as possible. We will send new accessories from the 0verseas warehouse for you to replace for your use. If the accessories in the 0verseas warehouse are insufficient, we will send them from China.

3. Refurbished machines only have 15 days of after-sales channels, and the warranty channels will be closed after 15 days.
① Please check the machine within 7 days after receiving it to check whether the machine is usable or missing accessories. If the accessories are missing after 7 days, they will not be sent free of charge.
② The refurbished machine will no longer be free of charge after 15 days from the date of receipt, but technical questions and machine usage instructions will still be provided.
③ In special circumstances, we will extend your warranty period. For example, if you assemble the machine immediately after receiving it, but find a fault and cannot use it, we will send you new accessories, and the warranty period will be calculated from the time you sign for the accessories.

4. Refurbished machines generally do not support exchanges. If you are not used to the appearance of the refurbished machine you received and want to exchange it, you need to do so within 7 days of receiving the goods, and you need to pay the shipping cost of the exchange and the shipping cost of the machine.Please note that the exchanged machine is still a refurbished machine.

Specification:

Item Model Number	ATOMSTACK P7 M40
Print Size	Recommend Print Size 200*200mm
Engraving Materials	Wood, bamboo, cardboard, plastic, leather, MDF, slate, lacquered metal, mirror stainless steel;
Cutting Materials	Cardboard, non-woven fabric, veneer, acrylic, some thin plastic board, sponge, MDF, leather;
Laser Output Power	4.5-5.5W
Wave Length	445 ± 5nm
Engraving Accuracy	0.01mm
Focusing Method	Fixed focus laser, no need to focus
Laser Protective Cover	Protect the user’s eyes and prevent pets from grabbing the laser spot.
Operating Software	LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system.
Input Format	NC, BMP, JPG, PNG, DXF, etc.
Data Transmission Method	USB Connection
Input Voltage	AC100-240V, 50/60Hz
Output Voltage	DC12V, 5A
Certification	CE FCC RoHS FDA PSE

Features	1. Eye-protection flame-retardant filter panoramic glass: The flame-retardant filter panoramic glass can filter 97% of the ultraviolet light, which plays a very good role in protecting your eyes. You and the people around you do not need to wear goggles, you can also clearly Watch laser engraving. Reduce the cost of your goggles and the inconvenience of wearing goggles. The glass is flame retardant and safer to use. 2. Robust and easy-to-install structure design: The all-aluminum alloy anodized structure design makes the machine more long-lasting and improves the accuracy of engraving. The portable all-metal structure, 85% pre-assembly, can be installed in 5 minutes. 3. Upgraded version of high-performance fixed-focus laser: Engraving can be done without adjusting the focal length; the newly upgraded compressed spot increases the energy concentration by 200%, and the spot size is only 0.02mm², which can take into account both precision engraving and high-energy cutting. At the same time, the laser power of fixed-focus laser is more stable than that of zoom laser. 4. Wide compatibility: The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support Apple system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc. 5. Precise scale lines axis : There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 200*200mm large area engraving interval can meet your various engraving needs. 6. Newly upgraded ultra-fine compression laser: The laser adopts 4-fold lens group collimation and focus technology, the optical power is 4.5~5.5W, the laser focus area is reduced to 0.02mm², the high-density laser can easily cut 10mm thick wood boards and 6-8mm black acrylic ; Can directly engrave mirror stainless steel metal and ceramics. 7. Integral screw rod: The machine uses an integrated screw rod instead of a combined coupling. The stepping motor and the screw rod are integrated, which makes the movement of the laser more precise and the coupling more long-lasting. 8. New laser with knob: It is more convenient and quick to adjust the height of the laser. 9. The new laser is equipped with a horizontal gyroscope: It stops working immediately when it is tilted to ensure your safety 10. Colorful gift box packaging: More beautiful and more convenient to give gifts.
Recommend Match	ATOMSTACK R3 24W Automatic Rotary Roller: Click Here ATOMSTACK Laser Cutting Honeycomb Board: Click Here
Note	● When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles. ● Please do not touch the laser emitter with your hand, or it may burn your hand. ● Please avoid strong impact on the machine. ● Children under 14 are not allowed to use this product and children over 14 need adult supervision. ● The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.